An engineer is configuring NAT to translate the source subnet of 10.10.0.0/24 to any ofthree addresses 192.168.3.1, 192.168.3.2, 192.168.3.3. Which configuration should be used?
A.enable configure terminal ip nat pool mypool 192.168.3.1 192.168.3.3 prefix-length 30 route-map permit 10.10.0.0 255.255.255.0 ip nat outside destination list 1 pool mypool interface g1/1 ip nat inside interface g1/2 ip nat outside B.enable configure terminal ip nat pool mypool 192.168.3.1 192.168.3.3 prefix-length 30 access-list 1 permit 10.10.0.0 0.0.0.255 ip nat outside destination list 1 pool mypool interface g1/1 ip nat inside interface g1/2正确答案C
Ip nat outside C.enable
Configure terminal
Ip nat pool mypool 192.168.3.1 192.168.3.3 prefix-length 30 access-list 1 permit 10.10.0 0.0 0.255 ip nat inside source list 1 pool mypool interface g1/1
Ip nat inside interface g1/2
Ip nat outside D.enable
Configure terminal
Ip nat pool mypool 192.168.3.1 192.168.3.3 prefix-length 30 access-list 1 permit 10.10.0.0 0.0.0.255 interface g1/1
Ip nat inside interface g1/2
Ip nat outside
